It is very difficult for a Wi-Fi
signal to reach on the every corner and floor of your house especially when you
have a large house. For large house you have to use Wi-Fi extender. Here is a
complete guide of how to set up a d’link Wi-Fi extender for dlink lite login.
1.
Check the wireless range of
your router and plug in the Wireless extender in the wall outlet.
2.
Now login to open the
wireless utility of your computer or laptop, and select your network or SSID.
3.
Now enter http://dlinkap.local
or IP address http://192.168.1.50. in the address bar of your browser.
4.
Now login with the default
username which is "Admin" and leave the password field blank and the
click on "login".
5.
Click on "Setup
Wizard" and the click on "Next".
6.
Select second option from your
setup wizard menu for manual network setup.
7.
Now choose the wireless network
from the list by clicking on it which you want to use as your uplink. Click on
select after selecting the network.
8.
After selecting your uplink
which you want to use, you need to enter the password of your uplink network,
and then click on "Next".
9.
Now you can check if your
extender is re-broadcasting the Wi-Fi signals from your uplink router or not.
Password and SSD will be automatically generated for the both frequency
networks 2.4 GHz as well as 5GHz. In case you want to change the setting, you
can change the password and SSID for that particular network.
